Features :
1,Heat Pipe:faster speed for heat transfer,more than copper 1000 times.
2,Freeze Protection: Because the heat pipe is located within the evacuated glass tube, brief working temperatures as low as -20oC (14oF)
3,Working pressure:6.0 bar for working,9.0 bar for testing,suited for existing government cold water supplier
4,Safety:no water in tube,if tube broken,no water lose.
5,High efficiency and temperature:highest temperature arrive 350 degree.
6,Each square meter can save 5khw energy every day!
Products list:
Model | Ligthing (m2) | Heat pipe | Supply hot water(L) | 20/40G/40H container | G.W. (kg) | |
|
diameter | length | No. | |
CUCHP47/12 | 1.26 | Φ47mm | 1500mm | 12 | 85 | 149/305/366 | 28 | |
CUCHP47/18 | 1.80 | 18 | 125 | 120/249/296 | 42 | |
CUCHP47/20 | 2.10 | 20 | 140 | 121/250/300 | 46 | |
CUCHP47/30 | 3.15 | 30 | 210 | 83/173/207 | 69 | |
CUCHP58/12 | 1.73 | Φ58mm | 1800mm | 12 | 120 | 149/301/359 | 40 | |
CUCHP58/18 | 2.57 | 18 | 180 | 102/215/256 | 60 | |
CUCHP58/20 | 2.88 | 20 | 200 | 89/174/216 | 64 | |
Technology:
Model Type | CUCHP |
Manifold casing material | Aluminum painted un-oxygen layer |
Frame material | Aluminum or Stainless Steel and painted Layer |
Header pipe material | Copper |
Heat pipe material | Copper |
Insulation | Polyurethane 55mm or Glass-reinforced polyester |
Rubber seals and rings | UV stabilized high temperature silicon rubber |
Test pressure | 9 bar |
Collector mounting | Plane roof/slope roof |
Angle of operation | 10℃-80℃ |
Inlet Outlet | Φ22 or 3/4 inch male |
Frame:Aluminum or Stainless Steel,coated un-oxygen layer
7 step for install the collector,very easy!